A Nepalese kora with fine pattern welded blade | Mandarin Mansion

A Nepalese kora with fine pattern welded blade

A fine Nepalese kora with pattern welded blade


Introduction

Presented in this article is one of the most characteristic swords out there, the Nepalese kora. Short but heavy, with its protruding tip it's rather mace-like. Where sabers minimize the area of contact with their curve so they put more pressure on a small area, the kora does the opposite: The concave edge "captures" anything that is hit with a portion below its point. While the spine is thick for strength and rigidity, the edge is thin and incredibly sharp. Even on this antique example.

Lord Egerton writes:
"The Nepalese use a larger knife, or sword "Kora" with an inner cutting edge, with which those who use it skilfully are enabled to cut a sheep into two with a single blow"1

The kora is thought to originate from Bengal but is mostly associated with the Gharkas of Nepal, who were known as capable and fearless warriors even today. Former Indian Army Chief of Staff Field Marshal Sam Manekshaw famously said: "If a man says he is not afraid of dying, he is either lying or he is a Gurkha."



Notes:
1. Lord Egerton of Tatton: Indian and Oriental Arms and Armour. Dover Publications; Revised edition, 2002. Page 100.


This example

Overall length: 64 cm
Blade length: 48.5 cm
Blade thickness: Base 10.5 mm, middle 8.5 mm, near tip 9 mm
Blade width: Base: 32 mm, middle 33 mm, widest at tip 112 mm
Weight: 1372 grams
Point of balance: 14 cm from guard

Origin: Nepal
Materials: Steel, iron, lacquered cord, red pigment
Dating: 19th century


Description

A nice example of a 19th century kora. It has a massive blade with thick, ridge spine and a long, shallow groove that widens near the characteristically shaped tip

The blade's surface is of a beautiful and incredibly fine pattern weld that is called "bird's eye" by virtue of the eye-like appearance of the many dots. The spine shows more of a paralel wood grain pattern, while the edge consists of a plate of high carbon steel that is exposed along the entire edge section.

The blade top has an engraving of an eye, which is filled with red pigment.

The hilt is otherwise quite simple, as these often tend to be. It consists of two flat discs that protect the hand that betray its Indian origins. The grip section is spiral bound and lacquered for extra durability. At the pommel is a conical structure with multi-layered peak that somewhat resembles the top of a stupa.



Condition
Overall in very good condition. There is minor friction between blade and handle. A professional polish by Philip Tom can help out bring the pattern more. One edge nick in the middle of the blade. Edge is incredibly sharp.



Conclusion
A very nice, almost textbook example of a Nepalese kora, but with the finest and most spectacular pattern welded blades I've seen on these to date.

€ 1800,-



Interested? Questions?
Contact peter@mandarinmansion.com

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade

A fine Nepalese kora with pattern welded blade


Like it? Share!